Techno Eco Work Methods – Engineered for Results:

1.Water Jet Washing:

Water jet washing is a critical surface preparation technique used before applying color plaster on exterior or interior walls. It ensures the surface is clean, stable, and ready to receive the plaster, which improves adhesion, longevity, and final appearance.

✅ Why Water Jet Washing is Important:

1.Removes Dust and Debris:

•Clears loose particles, dirt, and construction residues from the wall surface.

2.Eliminates Salts and Efflorescence:

•Helps remove any surface salt deposits that may cause future discoloration or peeling of the color plaster.

3.Strips Off Old Coatings:

•Can remove old paint, flaky plaster, algae, or mildew, which might affect bonding.

4.Opens the Pores of the Substrate:

•Exposes a fresh and absorbent surface for better penetration and adhesion of the plaster.

5.Reduces Surface pH:

•Helps wash off alkaline residues on new cement plaster, reducing the risk of reaction with the new color plaster.

Non-Metallic non-Shrink Fibber Reinforced Repair Mortar:

Product:

Non-Metallic Non-Shrink Fibber Reinforced Repair Mortar is a ready-to-use mortar mainly made of sand, special cement, fibers and additives that provide unique properties: non-shrinking, high strength, high adhesion and compactness. The highly compacted grains slow down carbonation.

Properties:

•Non-Shrinking

•High Strength

•Normal Setting

•Good Resistance to sea water and to high sulphate water

•Prevents steel reinforcements from corrosion

SCOPE OF USE:

•Repair of concrete surfaces, honeycombing, edges of steps and all types of loads bearing situations.

•Restoring the structure of damaged construction: columns, slabs, vault, mats and dam overflows.

•Reinforcing of weakened structures such as balconies, pedestals and cornices.

Characteristics

Active ingredients:Hydraulic binders, synthetic fibers, without any chlorides or metal particles

Appearance:Grey Powder

Grain Size:0 to 2.5 mm

Mixing Water:7.5 - 8.5 liters / 50 kg bag 3.75 - 4.25 liters (3.25 - 3.75 L. for Lebanon) 25kg bag

Yield:25 liters / 50 kg bag

 12.5 liters / 25 kg bag

Thickness:5 to 50 mm in one coat

Comprehensive Strength -EN 2190 at 22°C± 1:

1 day

7 days

28 days15 Mpa

30 Mpa

>40 Mpa

Flextural Strength -BS En 196-1 at 22°C± 1

28 days>6 Mpa

Test for Compatibility with potable water BS6920: port 1:2001Complies

 Applications:

•Structural concrete repairs

•Columns, beams, slabs, and precast repairs

•Overhead or vertical patching

•Bridge decks, parking garages, tunnels

 Advantages:

•Long-lasting and durable

•Crack-resistant

•Corrosion-free

•High bond strength to concrete

•Easy to apply on vertical and overhead surfaces

Fiberglass Mesh:

It is a lightweight, flexible grid-like fabric made from thin glass fibers. The mesh is often coated with alkali-resistant chemicals (like acrylic or epoxy resins) to improve its durability when embedded into cementitious or other alkaline materials.

Application Area:Purpose

Waterproofing SystemsReinforces bitumen, cementitious, or acrylic coatings.

Wall and ceiling plasteringPrevents cracks and improves bonding in internal and external walls.

EIPS (External Insulation & Finish Systems)Provides structural support and prevents surface cracking.

Tile Adhesives & MortarReinforcement under tiles or mosaics.

Concrete Repair SystemsEnhances adhesion and distributes stress over repaired areas.

Advantages:

•High tensile strength

•Alkali-resistant

•Easy to cut and apply

•Rust-proof (unlike metal mesh)

•Lightweight and flexible

•Excellent dimensional stability

•Fire and rot-resistant

Mixed Mechanical Replacement by Styrene Butadiene Rubber + Distilled Water:

In advanced applications of color plaster, especially where performance and aesthetic quality are critical, the mixing process plays a fundamental role in the final outcome. Traditionally, the plaster mix is blended using mechanical mixing methods — typically with a low-speed drill or a paddle mixer. This method, known as “Mixed Mechanical”, ensures uniform dispersion of cement, aggregates, polymers, and pigments throughout the plaster. It eliminates air pockets, minimizes lumps, and creates a consistent texture that is essential for decorative finishes.

To enhance the performance of the color plaster, the traditional addition of plain water during mixing is being replaced by a combination of Styrene Butadiene Rubber latex and distilled water. Styrene Butadiene Rubber is a powerful polymer additive known for improving flexibility, adhesion, and water resistance of cementitious plasters. When mixed with distilled water instead of regular tap water, it provides a much more controlled and reactive environment. This results in better chemical bonding between the polymer and the cement particles, leading to superior performance in durability, surface bonding, and finish quality.

Why Use Styrene Butadiene Rubber + Distilled Water Instead of Normal Water?

•Eliminates Impurities

Distilled water is free from salts, chlorine, minerals, and organic contaminants found in tap water. This prevents unwanted reactions with SBR or cement, ensuring a clean chemical environment.

•Maximizes Polymer Efficiency

SBR performs best in a neutral and pure mixing medium. Distilled water allows the polymer chains to remain active and fully functional during hydration.

•Improved Adhesion

The bond strength to substrates is noticeably higher when SBR is mixed with distilled water due to better dispersion and particle interaction.

•Longer Pot Life and Workability

The mix remains workable for a longer time, providing better control during application and finishing.

•No Efflorescence Issues

Tap water often contributes to white salt deposits (efflorescence) on the plaster surface. Using distilled water prevents this problem.

•Consistent Color Quality

With no mineral or chemical interference, pigments in the plaster remain pure and evenly distributed, resulting in sharper, more consistent color tones.

•Higher Durability

The final plaster is more resistant to weathering, cracking, and moisture, especially in harsh climates like the Gulf region.

Why you should use Techno Eco for Decorative Render Solutions?

At Techno Eco, we redefine the standards of decorative and protective finishing by offering high-performance color plaster systems tailored for the Gulf climate. Here’s why Techno Eco is the smart choice for your next project:

1. Durability That Lasts

Our decorative render solutions are engineered for extreme environments, offering:

•Long-lasting color stability

•Excellent UV resistance

•High resistance to moisture, salt, and environmental pollutants

Ideal for villas, commercial buildings, and external façades across Oman and the Gulf.

 2. Elegant Aesthetic Finishes

Techno Eco offers a wide variety of textures, grains, and colors to match your design vision:

•Smooth or textured finishes (fine, medium, coarse)

•Modern, traditional, or custom shades

•Seamless beauty with fade-resistant pigments

 3. Ready-to-Use & Easy Application

•Supplied in pre-mixed form, ready for immediate use

•Excellent workability for spray application

•Compatible with multiple substrates (concrete, plaster, cement board, etc.)

•Can be applied over existing coatings with minimal preparation

 4. Breathable and Weather-Proof

•Water-repellent yet breathable, allowing trapped moisture to escape

•Prevents flaking, blistering, and fungal growth

•Perfect for humid and coastal regions

 5. Backed by Technical Support & Experience

•Over 30 years of expertise in construction coatings and waterproofing

•Supported by on-site training, application guidance, and product customization

•Trusted by engineers, consultants, and contractors across Oman

 6. Certified Quality

Our color plasters are developed using internationally certified raw materials and conform to Gulf region building standards, ensuring peace of mind and performance.

✅ Choose Techno Eco – Where Performance Meets Aesthetic Excellence

Color Render Options Available:

•Normal Acrylic

-Caparol

-Jotun

•Techno Eco Thermal Paint

Normal Acrylic Coating – Caparol:

Caparol is known for its premium-quality acrylic and silicone-based coatings, commonly used for exterior façades and decorative finishes. Products like Amphibian and Muresko offer excellent weather resistance, breathability, and UV stability. These coatings provide a clean, durable finish suitable for both residential and commercial projects. While Caparol excels in protecting surfaces against environmental degradation, it does not offer any thermal insulation. Its purpose is purely aesthetic and protective, not functional in terms of heat control.

Normal Acrylic Coating – Jotun:

Jotun is a trusted global brand with a variety of acrylic-based coatings such as Jotashield Tex Ultra, Fenomastic, and Jotashield Color Extreme. These paints are widely used across the Gulf region for their fade-resistant colors, anti-carbonation performance, and weatherproof qualities. Jotun acrylic coatings are ideal for enhancing the look and lifespan of buildings. However, like Caparol, Jotun acrylics are non-insulating — they do not reduce internal temperatures or provide energy-saving benefits in hot climates.

Why Choose Techno Eco Thermal Coating Instead?

Techno Eco Thermal Coating – Key Advantages:

🌡️ Thermal Insulation Built-In:

Unlike acrylic paints, Techno Eco Thermal Coating contains nano-ceramic or hollow glass microspheres that reflect solar radiation and reduce heat absorption. This can lower surface temperatures by 15–25°C, making indoor environments significantly cooler.

Without Thermal Paint | With Thermal Paint

💡 Energy Cost Reduction:

The thermal insulation helps reduce dependency on air conditioning systems, cutting energy bills by up to 30–40% — something that Caparol and Jotun acrylics do not offer.

🧱 Dual-Action: Protection + Insulation:

Techno Eco provides both decorative surface protection and functional thermal performance in a single coating system, reducing the need for separate insulation materials.

🔬 Advanced Nanotechnology Formula:

Engineered using high-reflectance pigments, nano-silica, and elastomeric polymers, Techno Eco coatings adapt to expansion/contraction without cracking, and withstand harsh Gulf climates.

A unique revolution in the world of paints using space research technology

- NASA Nano Tech.

- Waterproof

 - Sound and Heat retardant

- Energy Saving

- Anti-condensation & Anti-carbonation

- Environmentally friendly

☀️ Superior UV and Infrared Reflection:

Techno Eco coatings reflect over 80% of solar energy (ASTM C1549) and offer high infrared emissivity, keeping both the structure and coating cooler for longer.

🛡️ Waterproof & Breathable:

The coating is water-resistant, preventing moisture ingress, yet remains vapor-permeable, allowing the substrate to breathe — essential for long-term durability.

🔧 Application is Just Like Paint:

No special tools or training are required. It can be applied with brush, roller, or spray — just like acrylic systems — making it suitable for any skilled painter or applicator.

📈 Long-Term Performance & ROI:

With up to 15+ years of durability, Techno Eco Thermal Coating provides both financial and functional returns, far beyond what acrylic paints can achieve.

🧪 Lab Tested and Certified:

Meets international standards including:

•ASTM C1549 – Solar Reflectance

•ASTM C1371 – Infrared Emittance

•ASTM E96 – Water Vapor Transmission

Backed by real-world application success in Oman and GCC projects.

Technical Datasheet – Thermal Paint Techno Eco

PropertySpecifications

TypeNano-Ceramic, Elastomeric, Water-Based Coating

ColorWhite (high SRI), Colorful Custom Tints Available

Density1.2 ± 0.05 kg/L

pH8 ~ 9

ComponentsRubber polymeric materials + hollow filler balls (vacuum-based), nano-ceramic tech

Thermal Insulation DifferenceUp to 25°C reduction in surface temperature

Indoor Cooling ImpactReduces indoor temperature by 4–15°C in summer

Recommended DFT (Dry Film Thickness)600–800 microns (in 2 coats)

Consumption Rate200 g/m² (walls/facades), 400 g/m² (roofs)

Application ToolsBrush, Roller, Airless Spray

Drying TimeTouch: 2–3 hours / Recoat: 6–8 hours

WaterproofYes

BreathableYes (ASTM E96)

UV Blocking99 %

Infrared Blocking90 %

Visible Light Transmission75 %

Emissivity (E%)0.90 (ASTM C1371)

Solar Reflectance (SRI)≥ 0.80 (ASTM C1549) / Index 109–111

Reflectance (R%)94 %

Absorption (A%)5.4 %

Glass Energy Saving rateup to 39.4 %

Noise Reduction Coefficient (NRC)Improves from 0.02 0.15 (720%)

Sound Absorption Average (SAA)Improves from 0.02 0.12 (600%)

VOC Content< 50 g/L (Eco-Friendly, Low-VOC Compliant)

Operating Temperature Range-30°C to +150°C

Service LifeUp to 15 years

Key Performance Standards

Solar Reflectance Index (SRI)ASTM C1549 – high (109 - 111)

Thermal EmissivityASTM C1371 - ≥ 0.90

Water Vapor TransmissionASTM E96 – Breathable

Sound Absorption / NRC / SAALab tested – Enhanced Significantly

🏁 Final Message to Clients:

While Caparol and Jotun acrylics offer solid decorative and protective benefits, Techno Eco Thermal Coating goes far beyond — delivering true functional value through energy savings, heat reduction, and enhanced building performance. It’s the perfect solution for modern construction in Gulf climates, where aesthetic + insulation is both essential