At Techno Eco, we bring over 30 years of proven expertise in delivering high-performance solutions for waterproofing, thermal insulation, protective coatings, and epoxy systems. Our work methods are defined by a commitment to excellence, innovation, and long-term durability, making us a trusted name across the Gulf region.

We follow a systematic, engineered approach — starting from detailed surface assessments and preparation, to the careful selection of advanced materials, and finishing with precise application techniques using skilled technicians and modern equipment. Every project we undertake is backed by international certifications, quality control at every stage, and a deep understanding of local climate challenges.

At Techno Eco, our work is not just about application — it's about building sustainable, energy-efficient, and future-proof solutions tailored to each client's needs. Our legacy is built on decades of reliability, environmental responsibility, and technical excellence — ensuring that every project we complete stands the test of time.

Techno Eco Work Methods – Engineered for Results:

Water Jet Washing: ✅ Why Water Jet Washing is Important:

Water jet washing is a critical surface preparation technique used before applying color plaster on exterior or interior walls. It ensures the surface is clean, stable, and ready to receive the plaster, which improves adhesion, longevity, and final appearance.

1.Removes Dust and Debris:

•Clears loose particles, dirt, and construction residues from the wall surface.

2.Eliminates Salts and Efflorescence:

•Helps remove any surface salt deposits that may cause future discoloration or peeling of the color plaster.

3.Strips Off Old Coatings:

•Can remove old paint, flaky plaster, algae, or mildew, which might affect bonding.

4.Opens the Pores of the Substrate:

•Exposes a fresh and absorbent surface for better penetration and adhesion of the plaster

5.Reduces Surface pH:

•Helps wash off alkaline residues on new cement plaster, reducing the risk of reaction with the new color plaster.

Non-Metallic non-Shrink Fibber Reinforced Repair Mortar:

Product:

Non-Metallic Non-Shrink Fibber Reinforced Repair Mortar is a ready-to-use mortar mainly made of sand, special cement, fibers and additives that provide unique properties: non-shrinking, high strength, high adhesion and compactness. The highly compacted grains slow down carbonation.

Properties:

•Non-Shrinking

•High Strength

•Normal Setting

•Good Resistance to sea water and to high sulphate water

•Prevents steel reinforcements from corrosion

SCOPE OF USE:

•Repair of concrete surfaces, honeycombing, edges of steps and all types of loads bearing situations.

•Restoring the structure of damaged construction: columns, slabs, vault, mats and dam overflo

•Reinforcing of weakened structures such as balconies, pedestals and cornices.

Characteristics

Active ingredients:Hydraulic binders, synthetic fibers, without any chlorides or metal particles

Appearance:Grey Powder

Grain Size:0 to 2.5 mm

Mixing Water:7.5 - 8.5 liters / 50 kg bag 3.75 - 4.25 liters (3.25 - 3.75 L. for Lebanon) 25kg bag

Yield:25 liters / 50 kg bag

 12.5 liters / 25 kg bag

Thickness:5 to 50 mm in one coat

Comprehensive Strength -EN 2190 at 22°C± 1:

1 day

7 days

28 days15 Mpa

30 Mpa

>40 Mpa

Flextural Strength -BS En 196-1 at 22°C± 1

28 days>6 Mpa

Test for Compatibility with potable water BS6920: port 1:2001Complies

 Applications:

•Structural concrete repairs

•Columns, beams, slabs, and precast repairs

•Overhead or vertical patching

•Bridge decks, parking garages, tunnels

 Advantages:

•Long-lasting and durable

•Crack-resistant

•Corrosion-free

•High bond strength to concrete

•Easy to apply on vertical and overhead surface

Fiberglass Mesh:

It is a lightweight, flexible grid-like fabric made from thin glass fibers. The mesh is often coated with alkali-resistant chemicals (like acrylic or epoxy resins) to improve its durability when embedded into cementitious or other alkaline materials.

Application Area:Purpose

Waterproofing SystemsReinforces bitumen, cementitious, or acrylic coatings.

Wall and ceiling plasteringPrevents cracks and improves bonding in internal and external walls.

EIPS (External Insulation & Finish Systems)Provides structural support and prevents surface cracking.

Tile Adhesives & MortarReinforcement under tiles or mosaics.

Concrete Repair SystemsEnhances adhesion and distributes stress over repaired areas.

Advantages:

•High tensile strength

•Alkali-resistant

•Easy to cut and apply

•Rust-proof (unlike metal mesh)

•Lightweight and flexible

•Excellent dimensional stability

•Fire and rot-resistant

Interior Decorative white plaster

In advanced applications of the system , especially where performance and aesthetic quality are critical, the fixing process plays a fundamental role in the final outcome. Traditionally, the plaster mix is blended using mechanical mixing methods — typically with a low-speed drill or a paddle mixer. This method, known as “Mixed Mechanical”, ensures uniform dispersion of throughout the plaster .

To enhance the performance of the glue, the traditional addition of plain water during mixing is being replaced by a combination of Styrene Butadiene Rubber latex and distilled water. Styrene Butadiene Rubber is a powerful polymer additive known for improving flexibility, adhesion, and water resistance . When mixed with distilled water instead of regular tap water, it provides a much more controlled and reactive environment. This results in better chemical bonding between the system and the surfaces , leading to superior performance in durability, surface bonding, and finish quality.

Why Use Styrene Butadiene Rubber + Distilled Water Instead of Normal Water?

•Eliminates Impurities

Distilled water is free from salts, chlorine, minerals, and organic contaminants found in tap water. This prevents unwanted reactions with SBR or cement, ensuring a clean chemical environment.

•Maximizes Polymer Efficiency

SBR performs best in a neutral and pure mixing medium. Distilled water allows the polymer chains to remain active and fully functional during hydration.

•Improved Adhesion

The bond strength to substrates is noticeably higher when SBR is mixed with distilled water due to better dispersion and particle interaction.

•Longer Pot Life and Workability

The mix remains workable for a longer time, providing better control during application and finishing.

•No Efflorescence Issues

Tap water often contributes to white salt deposits (efflorescence) on the plaster surface. Using distilled water prevents this problem.

•Higher Durability

it will increase the resistant to weathering, cracking, and moisture, especially in harsh climates like the Gulf region.

Why you should use Techno Eco for Interior Render Solutions?

At Techno Eco, we redefine the standards of decorative and protective finishing by offering high-performance Hemi-hydrated gypsum, hydrated lime, oven dried white sand and chemical improving agents AS unique innovation system

1. Durability That Lasts

Our decorative solutions are engineered for extreme environments, offering:

•Long-lasting stability

•Excellent bonding to the background due to high mechanical properties

•High resistance to moisture, salt, and environmental pollutants

Ideal for villas, commercial buildings, and external façades across Oman and the Gulf.

 2. Elegant Aesthetic Finishes

•Very Smooth to start the paint direct

• beauty with unique and innovation system

• Enhanced insulation properties and surface hardness

 3 and Fire & Weather-Proof

•Water-repellent yet breathable, allowing trapped moisture to escape

•Prevents flaking, blistering, and fungal growth

•Perfect for humid and coastal regions

 4. Backed by Technical Support & Experience

•Over 30 years of expertise in construction

•Supported by the manufacturing , application guidance, and product customization

•Trusted by engineers, consultants,

 5. Certified Quality

 developed using internationally certified raw materials and conform to Gulf region building standards, ensuring peace of mind and performance.

Technical Data

BinderHemi hydrated gypsum

Size of the aggregate1.0 mm

DensityDry 1.0 kg/ltr , Wet 1.82 kg/ltr.

Water requirement25%

Approximate yield /coverage22.22 ltrs per bag / 1.82 m2 per bag @13mm thickness

Working timeApprox. 40 minutes

CuringWater curing is strictly prohibited

Compressive strength>3.0 N/mm2 at 28 days ASTM C579:2001 B

Flexural strength0.8 N/mm2 at 28 days BS 4551:1980

Packing33 kg paper bags

Shelf Life06 Months from date of Manufacture.

Application StandardsType N BS 5492, 4551, 1191 BS EN 13279 : 2005